Securitron, M62G-EX Maglocks for Hazardous Locations, UL294 Class 1, Division 2, Groups A, B, C, D

M62G-EX Magnetic Locks for Hazardous Locations, UL294, 1200lbs holding force

Product Overview

Magnetic Lock for Hazardous Locations, UL294 Class 1, Division 2, Groups A, B, C, D

Fully sealed and weatherized, 1200 pounds holding force Magnalock with conduit fitting & automatic dual voltage. Recommended for exterior and perimeter doors & gates through which criminals could gain entrance to cause substantial economic loss.

Product Features

• Patented instant release circuit - no residual magnetism
• Surface mounts easily with a minimum of tools
• Fully sealed electronics - tamper proof and weatherproof
• Mounted using steel machine screws into blind finishing nuts
• Architectural brushed stainless steel finish (US32D/630)
• All ferrous metal surfaces plated to MIL specification
• Hardware accessories available to configure any opening
• G- Conduit Fitting Standard
• Ten feet [3.05m] of jacketed, stranded conductor
• Automatic dual voltage - no field adjustment required
• Lock options include BondSTAT magnetic bond sensor and integrated door position switch
• Universal threaded conduit fitting is 1/2 inch female - 3/4 inch male
• UL Listed, UL294

Specification Data

• Magnet size: 8 inches L x 1.75 inches W x 2.9 inches H
• Armature size: 6 inches L x 0.5 inch W x 2.75 inches H
• Current Draw and Voltage: 250mA at 12VDC; 150mA at 24VDC
• Operating Temperature: -40° F to +140° F [-40° C to +60° C]

Models

• M62G-EX - Magnetic Lock, Weatherized, Conduit Fitting, Rated for Hazardous Locations, Top Mount
• M62FG-EX - Magnetic Lock, Weatherized, Conduit Fitting, Rated for Hazardous Locations, Face Mount
• M62GD-EX - Magnetic Lock, Weatherized, Conduit Fitting, Rated for Hazardous Locations, Top Mount, w/ Door Position Status
• M62FGD-EX - Magnetic Lock, Weatherized, Conduit Fitting, Rated for Hazardous Locations, Face Mount, w/ Door Position Status

Certifications

• UL 294 Class I, Division 2, Groups A, B, C and D Listed
• UL 121201, Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
• CSA C22.2 No. 213-17, Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations
• UL 10C Listed
• CAN4-S104, CAN/ULC-S533 Listed
• ANSI/UL 294 Listed
• CSA-C22.2 No.205 Listed
• ANSI/BHMA A156.23, Grade 2;E08501-1000 Compliant
• CSFM California State Fire Marshal Approved
• CE:EN 50081-1(92), EN 61000-6-2(99) Approved

Warranty

• MagnaCare® Lifetime Replacement Warranty

Specifications

• Model: M62G-EX Magnalock for Hazardous Locations
• Manufacturer: Securitron
• Holding Force: 1200 lbs
• Voltage: 12 VDC or 24 VDC (automatic dual voltage)
• Current Draw: 250 mA at 12 VDC; 150 mA at 24 VDC
• Magnet Size: 8 inches L x 1.75 inches W x 2.9 inches H
• Armature Size: 6 inches L x 0.5 inch W x 2.75 inches H
• Operating Temperature: -40° F to +140° F (-40° C to +60° C)
• Hazardous Location Rating: UL 294 Class I, Division 2, Groups A, B, C and D; UL 121201 nonincendive (Class I and II, Division 2; Class III, Divisions 1 and 2)
• Conduit Fitting: Universal threaded, 1/2 inch female - 3/4 inch male
• Use: Weather resistant
• Finish: Architectural brushed stainless steel (US32D/630)
• Lead Wire: 10 feet (3.05 m) jacketed, stranded conductor
• Listing: UL 10C; CAN4-S104; CAN/ULC-S533; ANSI/UL 294; CSA-C22.2 No. 205; ANSI/BHMA A156.23 Grade 2; CSFM approved
• Warranty: MagnaCare Lifetime Replacement Warranty