Explosion Proof HID Prox Reader
Processing...

20% Off MSRP

Explosion Proof HID Prox Reader

$645.83 $807.29

Overview

Explosion proof reader rated for Class I, Div. 2, Groups A, B, C, D.

Features:

  • Accepts 5 to16 volts, meeting most voltage requirements
  • Available with Wiegand or Clock-and-data interface
  • Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required
  • Offers high reliability, consistent read-range and low power consumption in an easy-to-install package
  • Mounts directly onto metal with no change in read range performance
  • Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper
  • Rated Hazardous Locations Class I, Div. 2, Groups A,B,C,D
  • UL Listed

More Info +



Qty

Product Details

Features

  • Accepts 5 to16 volts, meeting most voltage requirements.
  • Available with Wiegand or Clock-and-data interface.
  • Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
  • Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
  • Mounts directly onto metal with no change in read range performance.
  • Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.
  • Rated Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
  • UL Listed

Specifications

  • Typical maximum* read range
    • ProxCard® II card - up to 5.5 inches (14 cm)
    • ISOProx® II card - up to 5 inches (12.5 cm)
    • ProxKey™ II keyfob - up to 2 inches (5 cm)
    • ProxCard® Plus card - up to 2 inches (5 cm)
    • SmartProx™ II card - up to 5 inches (12.5 cm)
    • Note: Each typical miximum read range is subject to local installation conditions.
  • Dimensions - 6.0 inches x 1.7 inches x 1.0 inch (15.2 x 4.3 x 2.54 cm)
  • Material - Polycarbonate UL 94
  • Power supply - Standard MiniProx: 5.1-16 VDC, Haz. Loc. MiniProx: 5.1-16 VDC, Linear power supplies are recommended.
  • Current requirements - Average: 40 mA (5 VDC); 50 mA (12 VDC), Peak: 60 mA (5 VDC); 120 mA (12 VDC)
  • Operating temperature - 22º to 150º F (-30º to 65º C)
  • Operating humidity - 0-95% relative humidity non-condensing
  • Weight - With terminal strip 3.5 oz. (99 gm), With pigtail 3.8 oz. (108 gm), Haz. Loc. MiniProx: 3.8 oz. (108 gm)
  • Transmit frequency - 125 kHz
  • Excite frequency - 125 kHz

Certifications

  • Canada/UL 294 Listed: Access Control System Units
  • Canada/UL 1604 Listed (with Haz. Loc. junction box only), Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
  • FCC Certification, United States
  • Canada Certification, CE Mark
  • Europe, UK Type Approval
  • Germany Type Approval
  • Australia C-Tick Mark
  • New Zealand EMC

Model

  • 5365EKH00
Also Known As
HID-5365EGH00
Format
26-bit HID®
Manufacturer
HID Global
Manufacturer Warranty
Lifetime
Model Number
5365EKH00
Mount
Surface Mount
Operation Keypad
Prox card only
Operation Momentary Timer Maintained
Wiegand output only (no relay)
Power Requirements
12VDC
Type
Explosion-proof
UPC Code
639399224300
Explosion-proof
639399224300
1 Question asked on Explosion Proof HID Prox Reader



Q petpeterrper • 09/24/2021, 4:44:45 AM specifications for type of cable to use with HID prox reader My email: peterkigari@gmail.com
A 09/24/2021, 12:37:11 PM We typically recommend the use of 22 gauge/6 conductor copper stranded (shielded) wire. However, please consult with your local code inspector to confirm any additional special requirements when working in Class I, Div 2 environments.