Falcon EX Explosion Proof Motion Sensor

20% Off MSRP

Falcon EX Explosion Proof Motion Sensor

$1,548.77 $1,935.96


BEA’s Falcon EX combines the Falcon / FalconXL microwave activation sensors with an explosionproof / flame-proof housing eliminating the “spark and arc” risk found within hazardous environments including mining, chemical manufacturing, petroleum refining and agriculture.

The explosion-proof / flame-proof housing is a NEMA 4X, 7, 9 rated enclosure designed as an IP66 housing. This housing achieves UL Class I / Division I, Groups B, C, D; UL Class II, Groups E, F, G and UL Class III**.

** Adalet / Scott Fetzer Co., UL Listing #E81696

• Bidirectional, unidirectional approach and unidirectional depart microwave detection options
• Relay hold time can be configured from 0.5 to 9 seconds
• Supplied mounting bracket allows multiple mounting options from 0° to 180° tilt
• Explosion-proof / flame-proof enclosure prevents sparks or flames

More Info +

Select Model:


Product Details


The Falcon EX is an intrinsically safe* uni- and bi-directional motion sensor optimizing the performance of automatic doors in an explosion-proof enclosure. The Falcon EX detects moving objects and can reject pedestrian traffic and parallel traffic. By detecting vehicles and rejecting parallel traffic, the Falcon EX reduces door cycling and helps save energy.

The Falcon EX can be mounted from 138 to 276 inches (11.5 ft x 23 ft) to fit any industrial application. For lower mounting heights, BEA’s Falcon EX XL can be mounted from 84 to 138 inches (7 ft x 11.5 ft).

*The term “Intrinsically Safe” (I.S.) is frequently used to describe any product destined for an explosive area. I.S. is a protection concept based around limiting the available electrical energy to non-incendive levels so that sparks cannot occur from short circuit or failures which could cause an explosive atmosphere to ignite.

Technical Specifications

Sensor Technology: Microwave Doppler Radar
Radiated frequency: 24.125 GHz
Transmitter radiated power: <20 dBm EIRP
Transmitter power density: < 5 mW/cm²
Cable Length: 100ft
Mounting height:
FALCONEX100: from 11.5 to 23’
FALCONEXXL100: from 6.5 to 11.5’
Tilt adjustment angle: -90° to +30° in elevation
Temperature range: -22º F to +140º F


  • 10FALCONEX / FALCON EX: from 11.5 feet to 23 feet
  • 10FALCONEXXL /FALCON EX XL: from 6.5 feet to 11.5 feet
Also Known As
26-bit HID�
Model Number
Operation Keypad
Prox card only
Power Requirements
24V/12V AC/DC

Be the first to submit a question by using the form below: