15% Off MSRP
600WP, 600lb Weather-proof Magnetic Gate Lock
$285.43
$335.80
Overview
Alarm Controls Corporation 600 pound Weather-proof Single Magnetic Gate Lock, model 600wp. The 600wp provides a minimum of 600 pounds holding force, provides weatherproof design ideal for sliding and swinging gates.
Features:
- Ideal for sliding or swinging gates
- 600lbs holding force
- 12/24vdc operation
- Completely sealed in stainless steel case
Product Details
600lb Weather-proof Magnetic Gate Lock by Alarm Controls
Product Overview
Alarm Controls Corporation 600 pound Weather-proof Single Magnetic Gate Lock, model 600wp. The 600wp provides a minimum of 600 pounds holding force, provides weatherproof design ideal for sliding and swinging gates. The 600wp is 12 or 24 VDC operation.
Product Features
- 12 inch color coded leads in armored cable with metal end cap
- Ideal for sliding or swinging gates
- Non-aluminum parts are plated to resist corrosion
- Use 23/64 inch diameter drill for blind nuts provided with lock
- Self drilling TEC screws
- Completely sealed in stainless steel case
- Limited lifetime warranty
Specifications
- 600 lbs holding force
- Magnet size: 8-21/32" L x 1-9/32" H x 1-1/8" W
- Armature size: 7-9/32" L x 1-21/32" H x 1/2" W
- Operates on 12 or 24 VDC, switch selectable
- Current Draw: 500 mA at 12 VDC, 250 mA at 24 VDC
- Operating temperature: +14 to +131F [-10 to +55C]
Also Known As
600WP, 600wp, AC600WP, ALA300600WPFinish
Stainless SteelManufacturer
Alarm ControlsManufacturer Warranty
LifetimeModel Number
600WPPower Requirements
24VDC/12VDCStatus Monitor
Not AvailableUPC Code
604840848763
1 Question asked on 600WP, 600lb Weather-proof Magnetic Gate Lock •
Q
Bill Heintz • 04/21/2020, 12:12:40 PM
Does your 600WP have a 1/2 or 3/4 conduit fitting if you remove the supplied cord?
What is the striker plate made of? We need material that will stand up to wash down with acid or NaOH.
A
04/22/2020, 12:36:27 PM
No, the 600WP uses a custom fitted armored cable. For a standard conduit fitting please see the 1200lb model (part# 1200WP). Per the datasheet, the lock body is "Completely sealed in a Stainless Steel case" and "Non-aluminum parts are plated to resist corrosion". These are high quality magnetic locks that are used on all types of outdoor gates, marinas, tool cribs, etc without issue. For extreme use applications extra care may be required to wash off/neutralize any acids or look into applying a corrosion inhibitor. Give us a call and we would be happy to discus in further detail 1-866-500-5625
