SDC Security Door Controls 110/210 Conventional Mortise Bolt Locks
The solenoids are the strongest found in the industry for commercial or industrial grade applications. The power and strength of the solenoids far surpasses any competitive models.
5" depth required
110IV: 2-3/4” x 1-1/4” Face plate, less auto relock switch, Failsafe - Locked when energized
210HV: 2-3/4” x 1-1/4” Face plate, less auto relock switch, Failsecure - Unlocked when energized
Voltage: Dual 12/24VDC
450mA @ 24VDC
Finish: 628 Anodized Aluminum
Faceplate: 2-3/4H" x 1-1/4W" x 0.25"D
(69.85 x 31.75 x 6.35mm)
Strike: 2-3/4H" x 1-1/4W" x 0.125”D
(69.85 x 31.75 x 3.175mm)
Bolt: 5/8" dia. x 1/2" throw
(15.87mm x 12.7mm)
Depth: 5" (127mm)
|Manufacturer Warranty||2 Year|
|Status Monitor||Not Available|
Do you make a flush mount dead blot with a remote?
Posted byon Tuesday 13th of September 2011
This bolt would install in the door jamb and would sit flush with the frame, the bolt would then be activated using a power supply and release button. Please reference the second photo above for installation suggestions.
With the 110IV the bolt would be extended and locked when power is applied. Using the WRT-1 wireless release kit you would be able to cut power to the unit which would retract the bolt.
With the 210IV the bolt would be extended and locked when there is no power, power would have to be applied for the bolt to release.
A simple system would include the bolt (110 or 210), WRT-1 kit and a basic plug-in PS12-2 power supply. If you have any other questions please contact us using the "Live Chat" feature above or Toll Free at 1-866-500-5625