Single Door Remote Buzz-In Kit, electric strike
Processing...

Single Door Remote Buzz-In Kit, electric strike

$152.90

Overview

Remotely release your office door from the convenience of the reception desk with this easy to install kit.

For standard single latch doors with aluminum or hollow metal frames the 25-4u Electric Strike will install in the door jamb allowing the release of a locked door.

Works well With:  Metal Frame Doors with Cylindrical Locksets

Not recomended for:  Aluminum frame glass doors with flip out or hook deadbolts, Wooden frame or residential doors, Double doors

Kit Includes:

  • 25-4U Strike for Single Latch Doors
  • MC-Buzz Audio Buzzer
  • PS12-2 plug-in 12VDC, 2A power supply

If you have any questions regarding which kit will be best for your project please contact us Toll Free at 1-866-500-5625.

Locksets should have the Storeroom Function* to ensure proper operation of this system.

*Storeroom Function - Dead locking latch bolt operated by key in outside lever, or by operating inside lever.

More Info +


Select Locking Device:
Select Release Device:
Wire (select a length):

Qty

Product Details

Product Overview

Complete single door remote release Buzz-In kit for office doors includes electric strike and your choice of release options. Great for reception desks to allow entry through a locked door. Under normal operation the Electric Strike will remain in the locked positon, by pressing the release button the strike will unlock allowing the door to be pushed open.

Kit Includes

  • 25-4u electric strike for Medium-High traffic areas
  • MC-Buzz audio indicator
  • PS12-2 plug in power supply
  • * MC-Buzz buzzer creates an audible buzz upon unlock.

Features

Grade 2 electronic strike for use with single latch mechanical locksets, audio buzzer to alert of door release, plug in power supply and the release option of your choice.

Maglocks.com recommends using a STOREROOM function latch assembly.

Specifications

  • 25-4u Specifications: 4-7/8 inch x 1-1/4 inch Square Corner Faceplate for hollow metal frames. *retroft tabs included
  • PS12-2 Power Supply Specifications: 2A at 12VDC.

Works well With:

  • Metal Frame Doors with Cylindrical Locksets

Not recomended for:

  • Aluminum frame glass doors with flip out or hook deadbolts
  • Wooden frame or residential doors
  • Double doors

Great For

  • Medical offices
  • Dentist offices
  • Pawn shops
  • Boutique shops
  • Salons
  • Medical Marijuana Dispensaries
  • Waiting rooms
  • Receptionist release

If you have any questions regarding which kit will be best for your project please contact us Toll Free at 1-866-500-5625.

Locksets should have the Storeroom Function* to ensure proper operation of this system.

*Storeroom Function - Dead locking latch bolt operated by key in outside lever, or by operating inside lever.

Also Known As
Buzz-in Kit, Strike Kit, Single door kit
For Use With
Cylindrical Locksets, Hollow Metal Door Jambs
Manufacturer
Maglocks.com
Manufacturer Warranty
2 Year
Model Number
office kit with strike
Power Requirements
12VDC
5 Questions asked on Single Door Remote Buzz-In Kit, electric strike



Q Mark D Bauder • 05/11/2020, 5:30:28 PM Where would you typically locate the receiver? Does it need to be up high or can it be near the plug-in power unit at a wall outlet (obviously in the secured side of the door)?
A 05/14/2020, 2:09:08 PM When selecting the WRT-2 wireless package, the receiver should be positioned roughly within 50-60ft of the remotes. If there are any obstructions (metal, concrete walls, etc) we would recommend testing the remotes to ensure consistent operation before permanently mounting the receiver. *Additional wire can be used to locate the receiver closer to the remotes or around any obstructions if needed.
Q Mike • 11/04/2023, 7:50:46 AM How does the under desk button get wired in?
A 11/04/2023, 10:00:36 AM The HUB hard-wired button would wire in between the power supply and the electric strike. Specifically, you would use the (COM & NO) terminals on the HUB button to provide power to the positive side of the strike when the button is pressed. A complete wire diagram will be provided with the purchase of this kit showing these connections but if you have any additional questions feel free to give us a call direct at 1-866-500-5625