Product Overview

Rosslare’s Open to Secure™ (O2S®) family of readers are highly flexible smart card readers that redefine ease of use and high security in the world of RFID access control solutions. The readers support reading from and writing to the secure memory of the world’s most accepted RFID technologies – MIFARE® DESFire® EV1, MIFARE® Plus, and MIFARE Classic® EV1.

With MIFARE DESFire EV1 and MIFARE Plus credentials, you have access to the highest levels of cryptographic security with support for 128-bit AES encrypted communications between reader and credential. With O2S preprogrammed readers and credentials, you can have the highest level of secure access control solutions right out of the box.

Choose from a variety of standard configurations to get the functionality that you need – single gang or mullion mount, proximity only or proximity & keypad authentication, pigtail or terminal block termination, and multi-format Wiegand or OSDP outputs. You can customize the reader to meet your requirements for maximum configuration flexibility.

Features

Contactless smart card reader (13.56 MHz)
Meets ISO14443 Type A Standard
AES 128-Bit encryption during transmission (MIFARE Plus and MIFARE DESFire EV1)
Reads O2S ID data from O2S credentials
Reads CSN of non-O2S credentials
Output formats: Wiegand
RGB multi-color light indicator
Blue backlit tact switch keypad
Fully-potted construction for indoor and outdoor use
Optical back tamper sensor
Two LED control inputs
Buzzer control input

Technical Specifications

Operating Voltage Range 6 to 16 VDC
Standby Input Current at 12V 85 mA
Maximum Input Current at 12V 110 mA
LED Control Two Inputs: Green LED CTL and RED LED CTL – TTL
Auxiliary Input Buzzer CTL or Hold CTL – TTL
Auxiliary Output Tamper Output (OC, active low, max. sink current 30 mA)
Supported Data Formats Proximity: Wiegand (per format on O2S credential) OSDP via RS458 (selected models) Keypad: Seven user-selectable standard formats available
Maximum Cable Distance to Controller Wiegand: 500 ft (150 m) with 18-AWG cable
P00 - Pigtail Termination

Environmental Specifications

Operating Temperature -24ºF to 145ºF (-31ºC to 63ºC)
Operating Humidity 0% to 95% (non-condensing)
Outdoor Usage Weather-resistant, meets IP65, epoxy potted, suitable for outdoor use

Mechanical Specifications

Dimensions of Models (H x W x D)

AY-G6380B+P00: 5.7 x 1.7 x 0.9 inches (145.3 x 42.0 x 23.0 mm), Narrow Mount, Pigtail Termination
AY-H6380B+P00: 4.7 x 3.2 x 0.9 inches (120.0 x 80.0 x 23.0 mm), Single Gang, Pigtail Termination

Product Warranty

5-Year Limited Product Warranty

Proximity Readers