expert system design | lifetime technical support

maglock mounting bracket configurator

Maglocks bracket configurator

Find the correct mounting hardware required for your magnetic lock installation.

← back to resource hub

magnetic locks are incredibly powerful and reliable, but their performance relies entirely on geometry. for a maglock to secure a door properly, the electromagnet (mounted to the frame) and the steel armature plate (mounted to the door) must perfectly meet face-to-face when the door is closed. if your door swings inward, or if it is made of frameless glass, standard out-of-the-box mounting will not work.

understanding door swing & brackets

most magnetic locks are designed by default for standard "outswing" doors with solid frames. to accommodate different architectural designs, specialized aluminum brackets are required:

  • inswing doors (z-brackets): if the door swings toward the secure side (pulls toward you), the armature plate would naturally hit the magnet when opening. an l/z bracket assembly is required to suspend the armature plate away from the door so it meets the magnet correctly.
  • frameless glass doors (u-brackets): you cannot drill through tempered glass. a u-bracket (also known as a glass door armature housing) slides over the top edge of the glass door and clamps down using set-screws, allowing you to mount the armature plate without drilling.
  • frameless glass headers: if the wall above the door is also made of solid glass, you will need a specialized glass-mount bracket to secure the heavy electromagnet to the glass header safely.

how to determine door swing

stand on the secure side of the door (the side you are trying to keep people out of, usually the inside of the room/building). if you have to push the door to leave, it is an outswing door. if you have to pull the door toward you to leave, it is an inswing door.

how to use the configurator

select your door's swing direction, door material, and header material from the dropdowns below. our tool will analyze the geometry and recommend the exact brackets you need to successfully mount your magnetic lock.

maglock bracket configurator

select your door swing and frame materials below to determine the exact mounting hardware required for a successful installation.

please select all three dropdown options to configure your mounting brackets.

selecting holding force (1200lb vs. 600lb)

once you know which brackets you need, you must determine the required holding force for your magnetic lock. maglocks are generally categorized into two security levels:

  • 1200 lb (standard security): this is the industry standard for perimeter doors, exterior gates, and secure IT rooms. it provides enough holding force to withstand a full-force physical attack by an adult.
  • 600 lb (traffic control): commonly known as "mini" maglocks, these are used for interior traffic control, such as office doors or retail stockrooms. they will prevent casual entry, but can be forced open by a determined attacker with a pry bar.

still not sure? let our experts review your door.

if you have an unusual architectural design, recessed ceilings, or a fully glass entrance, don't guess! our access control specialists offer free hardware specification to ensure your maglock installation is secure and aesthetically pleasing.

simply email us a few photos of your application, and we will reply with the exact lock and bracket combination required. please include:

  • the full door: a wide photo showing the entire door and frame.
  • the header: a close-up photo of the top edge of the door and the frame above it.
  • swing direction: please state if the door pushes away or pulls toward the side you are taking the photo from.

We Are Here To Assist You

Whether you are in the office or at a job site, we are here for you.

Customer Service

General inquiries, product questions, and warranties.

1.866.500.5625

Corporate Office

1177 Riverfront Center
Amsterdam, NY 12010
United States

1.518.843.3322

Corporate Sales

Business to business project design and inquiries.

1.518.843.3322

Connect on Social

Follow us for industry news and product updates.

Connect on Chat

Chat with an advisor for immediate assistance.