Von Duprin, PS914 Base Power Supply 4-amp 16-amp Inrush
Processing...

Von Duprin, PS914 Base Power Supply 4-amp 16-amp Inrush

$412.80 $688.00

Overview

The Von Duprin PS914 is a 4-amp power supply designed to manage high in-rush requirements. Like similar power supply models under the Schlage brand, it is made for the electronic access control market and designed with versatility and reliability in mind. With proper option boards in place, the PS914 can manage up to 8 Von Duprin or Falcon EL devices.

It can be factory ordered to meet specific needs or configured in-field using a wide selection of option boards. Installation is simple with a flat mounting board and polarized locking connectors to make in-field expansions virtually plug-and-play. The design also provides easier access to the terminal blocks for connection of electrified devices.

More Info +


Qty

Product Details

Overview

The Von Duprin PS914 is a 4-amp power supply designed to manage high in-rush requirements. Like similar power supply models under the Schlage brand, it is made for the electronic access control market and designed with versatility and reliability in mind. With proper option boards in place, the PS914 can manage up to 8 Von Duprin or Falcon EL devices.

It can be factory ordered to meet specific needs or configured in-field using a wide selection of option boards. Installation is simple with a flat mounting board and polarized locking connectors to make in-field expansions virtually plug-and-play. The design also provides easier access to the terminal blocks for connection of electrified devices.

Output

  • 4-amp, Class 2, filtered and regulated power
  • Clean, consistent power output helps protect the sensitive circuitry of downstream products
  • Overload protection prevents too much current being pulled by an overload of devices
  • 12/24 VDC output field selectable with plug-in jumper
  • Externally visible LED indicator provides visual status on AC input
  • Ability to provide continual power with battery backup

Input

  • Universal 120-240 VAC, fused primary input
  • Externally visible AC input indicator with isolated SPDT contacts

Certifications

  • UL 294 for access control
  • ULC-S318
  • RoHS
  • FCC Part 15

Model

  • PS914: 4-Amp Class 2 filtered and regulated power

Input voltage

  • 120/240 VAC, 50/60 Hz, universal input

Output voltage

  • 12 or 24 VDC field selectable with jumper
  • Switching supply, 5% regulation, 360Vpp max ripple

Option boards

  • 900-BB: Battery backup option board (installs on main board)
  • 900-BBK: Battery backup kit (includes option board and two 7A/hour batteries)
  • 900-FA1: Emergency interface/fire alarm plug-in
Manufacturer
Von Duprin
Power Requirements
120VAC
3 Questions asked on Von Duprin, PS914 Base Power Supply 4-amp 16-amp Inrush



Q Todd • 04/21/2019, 6:37:35 PM How do you reset the PS914 Power Supply?
A 04/21/2019, 6:38:18 PM If PS914 is not providing any DC output, remove the load from DC output, turn the AC off then reapply the AC after a few seconds.
Q Jordan • 04/21/2019, 6:40:55 PM What is the AC monitor output on the PS914?
A 04/21/2019, 6:41:30 PM AC monitor output on the PS914 power supply provides you with a set of dry contact to monitor the 110-240 VAC input to the power supply. When AC power drops the contact will switch stage and provide you with an output signal.
Q Thomas • 04/21/2019, 6:42:58 PM What is the current rating for a PS914 power supply?
A 04/21/2019, 6:43:26 PM Output 4 Amp DC @ 12/24 VDC 16A, 300ms In rush capable for use with power Von Duprin & Falcon EL device at 24VDC,