Product Overview

The 918 EntryCheck™ is simple to operate. When a valid code is entered, the self-contained electronics will direct it to its programmed output(s).

500 Users, 1-6 digit PIN codes
4 outputs, 2 relay and 2 solid state outputs timed or latching (on/off)
Assign entry PIN’s to relays 1 and/or 2
LED Status: Access, lockout
Tactile keys with selectable audible volume for key depression or output activation
Timed anti-passback
Keypad tamper lockout
Request-to-Exit/Enter input

**Replaces the discontinued SDC 928 keypad

Specifications

Voltage 12/24 VAC/DC
Current 30mA typical, 150mA maximum
Outputs Relay 1 - SPDT 5amps @ 30VDC Relay 2 - SPDT 2amps @ 30VDC
Switch to Common Outputs 3 and 4 – 100mA @ 30VDC

Finish Options

918U 630 Brushed Stainless Steel (standard)
918C 605 Bright Brass
918D 606 Dull Brass
918H 613 Oil Rubbed Bronze
918P 625 Bright Chrome

Programming Options

The 918 and 920 EntryCheckTM includes a Door Sense/Inhibit Input feature. When programmed for "Door Sense", a door position switch wired into the input and detects a "forced entry" or "door ajar" condition. When programmed for "Inhibit Input", a maintained switch or automatic timer wired into a the input will disable the activation of the main relay. The EntryCheckTM also has a request-to-exit input for connection to an exit switch and/or fire access key switch for fire/emergency access. When access is granted, the shunt option is activated shunting alarm contacts on the door or gate. This prevents triggering of an alarm during authorized access.

Exterior Use Keypads