Features

Accepts 5 to16 volts, meeting most voltage requirements.
Available with Wiegand or Clock-and-data interface.
Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
Mounts directly onto metal with no change in read range performance.
Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.
Rated Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
UL Listed

Specifications

ProxCard® II card - up to 5.5 inches (14 cm)
ISOProx® II card - up to 5 inches (12.5 cm)
ProxKey™ II keyfob - up to 2 inches (5 cm)
ProxCard® Plus card - up to 2 inches (5 cm)
SmartProx™ II card - up to 5 inches (12.5 cm)
Note: Each typical miximum read range is subject to local installation conditions.

Dimensions - 6.0 inches x 1.7 inches x 1.0 inch (15.2 x 4.3 x 2.54 cm)
Material - Polycarbonate UL 94
Power supply - Standard MiniProx: 5.1-16 VDC, Haz. Loc. MiniProx: 5.1-16 VDC, Linear power supplies are recommended.
Current requirements - Average: 40 mA (5 VDC); 50 mA (12 VDC), Peak: 60 mA (5 VDC); 120 mA (12 VDC)
Operating temperature - 22º to 150º F (-30º to 65º C)
Operating humidity - 0-95% relative humidity non-condensing
Weight - With terminal strip 3.5 oz. (99 gm), With pigtail 3.8 oz. (108 gm), Haz. Loc. MiniProx: 3.8 oz. (108 gm)
Transmit frequency - 125 kHz
Excite frequency - 125 kHz

Canada/UL 294 Listed: Access Control System Units
Canada/UL 1604 Listed (with Haz. Loc. junction box only), Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
FCC Certification, United States
Canada Certification, CE Mark
Europe, UK Type Approval
Germany Type Approval
Australia C-Tick Mark
New Zealand EMC