MGT-2450P - 24VAC 50VA Class II Transformer
$30.00
Overview
24 VAC 50VA plug in transformer for access control equipment and accessories. Do not connect center terminal to DC Circuit. Use as Safety Ground or do not connect.
Product Details
Product Overview
The MGT2450P is a highly reliable plug-in Class II linear power supply providing 24VAC output at 50VA. It is built with a heavy duty case that includes a mounting tab and screw. An auto-resetting PTC fuse provides overload protection. An LED indicates AC power input. The plug includes a ground prong and there are three screw terminals for the output, including ground. The unit is UL cUL 1310 listed.
24 VAC 50VA plug in power supply for access control equipment and accessories.
Standard Features
- Plug-in Design
Technical Specifications
- Input: 120V 60Hz
- Output: 24VAC ~ 50VA
- Class II power supply
- Auto resetting fuse & 3rd ground prong
- Three screw terminal output
- UL and CUL listed
- LED AC power input indicator
- PTC fused
Model
- MGT-2450P 24VAC 50VA Class II Power Supply
Also Known As
MG-2450P, MB-MGT2450P, MG-ELECTRONICS-MGT2450PManufacturer
MG ELECTRONICSManufacturer Warranty
2 YearModel Number
MGT-2450PPower Requirements
24 VACStatus Monitor
n/aUPC Code
759377380047
1 Question asked on MGT-2450P - 24VAC 50VA Class II Transformer •
Q
Christian Le Roux • 06/02/2023, 10:19:14 PM
Hi, it seems that the left AC and GND are at 24VAC, then the Right AC and GND is 10 VAC. To get my required 24VAC, sould i just use the left and right ( like my multimeter shows for 24 VAC......or what do you recommmned> thanks so much christian
A
06/05/2023, 11:08:54 AM
For a 24VAC output the outer Left & Right terminals marked (AC) should be used. The middle terminal is reserved for Grounding purposes.
