Home »
Locking Devices »
Electric Bolt Locks »
SDC Security Door Controls 110/210 Conventional Mortise Bolt Locks

SDC Security Door Controls 110/210 Conventional Mortise Bolt Locks

Ask a question (1)

Availability: In stock

Regular Price: $172.00

Special Price: $146.20

Quick Overview

The failsafe 110 and failsecure 210 are the most basic bolt locks available. The bolt assembly is adjustable forward up to 1" (25.4mm) past the face plate to accommodate wide door gaps or special applications.

Recommended for wood and metal frames and cabinets with a minimum depth of 5” inches. These SDC bolt locks represent the most basic design in lock technology and are usually best suited for wood frame installation.

SDC Security Door Controls 110/210 Conventional Mortise Bolt Locks

Select Model (V 628 Aluminum finish standard) *

110IV: 2-3/4” x 1-1/4” Face plate, less auto relock switch, Failsafe
210HV: 2-3/4” x 1-1/4” Face plate, less auto relock switch, Failsecure

* Required Fields

Regular Price: $172.00

Special Price: $146.20

Qty:

-OR-

Details

SDC Security Door Controls Spacesaver 1190A/2090A Extra Heavy Duty Mortise Electric Bolt Locks

Product Overview

The solenoids are the strongest found in the industry for commercial or industrial grade applications. The power and strength of the solenoids far surpasses any competitive models.

5" depth required

Model

110IV: 2-3/4” x 1-1/4” Face plate, less auto relock switch, Failsafe - Locked when energized
210HV: 2-3/4” x 1-1/4” Face plate, less auto relock switch, Failsecure - Unlocked when energized

Electrical Specifications

Voltage: Dual 12/24VDC
900mA@ 12VDC
450mA @ 24VDC

Mechanical Specifications

Finish: 628 Anodized Aluminum
Faceplate: 2-3/4H" x 1-1/4W" x 0.25"D
(69.85 x 31.75 x 6.35mm)
Strike: 2-3/4H" x 1-1/4W" x 0.125”D
(69.85 x 31.75 x 3.175mm)
Bolt: 5/8" dia. x 1/2" throw
(15.87mm x 12.7mm)
Depth: 5" (127mm)

Options

none

Additional Information

Manufacturer	SDC Security
Manufacturer Warranty	2 Year
Status Monitor	Not Available
Finish	No
Power Requirements	24VDC/12VDC
Maglocks.com Rating	Good

Products Questions:

1 Answer

Do you make a flush mount dead blot with a remote?

Posted by Donnie Carter on Tuesday 13th of September 2011

Question:

Do you make a flush mount dead blot with a remote?

Answers:

Posted by Ronald Wenskoski on Tuesday 13th of September 2011

This bolt would install in the door jamb and would sit flush with the frame, the bolt would then be activated using a power supply and release button. Please reference the second photo above for installation suggestions.

With the 110IV the bolt would be extended and locked when power is applied. Using the WRT-1 wireless release kit you would be able to cut power to the unit which would retract the bolt.

With the 210IV the bolt would be extended and locked when there is no power, power would have to be applied for the bolt to release.

A simple system would include the bolt (110 or 210), WRT-1 kit and a basic plug-in PS12-2 power supply. If you have any other questions please contact us using the "Live Chat" feature above or Toll Free at 1-866-500-5625