5365EKH00 Explosion Proof HID Prox Reader

Features

• Accepts 5 to16 volts, meeting most voltage requirements.
• Available with Wiegand or Clock-and-data interface.
• Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
• Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
• Mounts directly onto metal with no change in read range performance.
• Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.
• Rated Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
• UL Listed

Specifications

• Typical maximum* read range
• ProxCard® II card - up to 5.5 inches (14 cm)
• ISOProx® II card - up to 5 inches (12.5 cm)
• ProxKey™ II keyfob - up to 2 inches (5 cm)
• ProxCard® Plus card - up to 2 inches (5 cm)
• SmartProx™ II card - up to 5 inches (12.5 cm)
• Note: Each typical miximum read range is subject to local installation conditions.
• Dimensions - 6.0 inches x 1.7 inches x 1.0 inch (15.2 x 4.3 x 2.54 cm)
• Material - Polycarbonate UL 94
• Power supply - Standard MiniProx: 5.1-16 VDC, Haz. Loc. MiniProx: 5.1-16 VDC, Linear power supplies are recommended.
• Current requirements - Average: 40 mA (5 VDC); 50 mA (12 VDC), Peak: 60 mA (5 VDC); 120 mA (12 VDC)
• Operating temperature - 22º to 150º F (-30º to 65º C)
• Operating humidity - 0-95% relative humidity non-condensing
• Weight - With terminal strip 3.5 oz. (99 gm), With pigtail 3.8 oz. (108 gm), Haz. Loc. MiniProx: 3.8 oz. (108 gm)
• Transmit frequency - 125 kHz
• Excite frequency - 125 kHz

Certifications

• Canada/UL 294 Listed: Access Control System Units
• Canada/UL 1604 Listed (with Haz. Loc. junction box only), Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
• FCC Certification, United States
• Canada Certification, CE Mark
• Europe, UK Type Approval
• Germany Type Approval
• Australia C-Tick Mark
• New Zealand EMC

Model

• 5365EKH00