SDC Security Door Controls 925 Series Outdoor Integrated Digital Keypad, 480 PIN Codes

Product Overview

The 925 EntryCheckTM is intended for extended service, indoors or outdoors, in tough commercial environments. The keypad is housed in a rugged, cast aluminum enclosure that can be mounted to a wall or pedestal. A keylock secures the housing to the mounting plate. The die-cast buttons feature bright, durable, easy to read, yellow graphics.

• Keypad programmable
• 480 user codes
• 1 to 6 digit user codes
• 4 independent outputs
• 4 independent timers
• 2 Form C relay contacts
• 2 solid state open collector outputs
• Program entry codes to activate one or two relays
• Door sense input or disable input
• Request-to-exit/enter input
• Keypad tamper lockout
• Timed anti-passback
• Courtesy lamp
• Two LED status indicators
• Tactile key feel
• Audible code entry verification

Specifications

Dimensions: 4"W x 5-1/2"H x 3"D
Voltage: 12/24VDC or AC(ac supply must be
transformer isolated)
Current: 10 mA typical, 150 mA maximum
Outputs: Relay #1, SPDT, 5 Amps @ 24V
Relay #2, SPDT, 1 Amp @ 24V
Output #3 and #4, solid state open
collectors, short to common,
100 mA @ 30VDC
Temperature: -22°F to +149°F (-30°C to + 65°C)
Humidity: 5% to 95%, non-condensing

Rugged Outdoor Design

The 925 EntryCheckTM is intended for extended service,
indoors or outdoors, in tough commercial environments. The
keypad is housed in a rugged, cast aluminum enclosure that
can be mounted to a wall or pedestal. A keylock secures the
housing to the mounting plate. The die-cast buttons feature
bright, durable, easy to read, yellow graphics.

Programmable Operating Features

• System reset (keys * 9 #)
• Entry code length, 1 to 6 digits
• Adding a new PIN
• Erasing a single PIN
• Erasing all PINs
• Changing the master programming code
• On-time for each of the four outputs
• Beep sounds on key presses
• Beep sound during each of the four outputs activation time
• Keypad lockout after specified number of incorrect PIN attempts, from 2 to 7
• Anti-passback time period from 1 to 4 minutes or no anti-passback protection

Programming Options

Several input and output options are available, including:
A door sense/disable input, when programmed for “Door
Sense“, a door status switch detects forced entry or door ajar.
When programmed for “disable” the input may be wired to a
maintained switch or automatic timer that will disable relay #1.
The EntryCheckTM also has a request-to-exit/enter input for
connection to an exit switch or fire access key switch for fire/
emergency access.
When access is granted the alarm shunt option is activated
shunting alarm contacts on the door or gate. This prevents
triggering of an alarm during authorized access.