Complete Single Door Magnetic Lock kit
Single door access control system inlcudes a magnetic lock (600lbs or 1200lbs), PIN/Prox reader for entry, Request to Exit devices and Power Supply with battery backup. The remote release button can be wired to allow door release from almost anywhere in the building.
Power supply with battery backup ensures your door remains secure and all system components remain operational in the event of a power failure.
• PIN, Prox card or PIN + Prox card entry
• 2000 user capacity
• All programming is done through the keypad
• 1 form C relay
• Electronics are epoxy sealed, IP68 rated (will accept PIN codes and Prox cards while completely submerged in up to 1 meter of water)
• Metal vandel resistant construction, includes security screws and built in anti-tamper alarm
• 5 PCS-1 Prox cards included with keypad purchase
Single Gang Keypad Dimensions: 4-3/4 L x 3-1/8" W x 1" D
Narrow Keypad Dimensions: 4-3/4 L x 2-1/4" W x 7/8" D
CM600 Lock Dimensions: 9.84" L x 1.85" H x 0.98" D
CM1200 Lock Dimensions: 10.47" L x 2.87" H x 1.57" D
Power Supply Specifications: 1.2 amps at 12VDC
Estimated Battery Backup Life (PS1250) with single maglock system: 7 1/2 hours
|Manufacturer Warranty||2 Year|
Regular Price: $819.25
Special Price: $779.15
Regular Price: $679.99
Special Price: $649.99
Regular Price: $1,009.99
Special Price: $979.99
Regular Price: $1,559.00
Special Price: $1,099.00
I'm looking for a system that i can shut cards off if needed and turn on when needed and how hard is it to program cards.
Posted byon Thursday 9th of July 2015
This system would allow you to add/remove cards directly through the CC-3800 using the included program manual.
For a large number of card users we also have computerized access control systems where all programming is handled from your PC.
I am interested in purchasing access control system. Have never installed one. does your company offer classes or instruction on the install. Thanks for your time.
Posted byon Thursday 11th of October 2012
Most of our customers are able to do their own installation for this kit using common power tools, 18 guage copper stranded wire and by following the included complete wiring diagram.
This kit is also backed by our 100% Free over the phone technical support assistance if you run into any installation or programming questions.
what is the operating temperature of the card reader
Posted byon Sunday 20th of November 2011The operational temperature for the CC-3800EM is an ambient range of: -25 to 60 Celcius (-13 to 140 Fahrenheit).
My question is about the Complete maglock kit you have advertised for $575.99 It says that the keypad has proximity reader and comes with one card. How many cards can the keypad read and can i purchase more pcs-1 cards? How much are the cards?
Posted byon Tuesday 23rd of August 2011
This system will come with (5) PCS-1 cards and can hold up to 2000 cards/tags. Additional cards and tags can be purchased to the right of the kit under "Related Products" or you can use this direct link: cards/tags