600s, 600lb Holding Force Single Magnetic Lock
Processing...

15% Off MSRP

600s, 600lb Holding Force Single Magnetic Lock

$169.15 $199.00

Overview

Alarm Controls Corporation's 600 pound Single Magnetic Lock, model 600s. The 600s provides a minimum of 600 pounds holding force and utilizes the ACC E-Z mount system for easy installation. The 600s is 12 or 24 VDC, jumper selectable and can be used with any access control system.

Features:

  • 600lbs holding force
  • E-Z mount system, No special tools required
  • U.L. and Canadian U.L. Listing number R16759
  • Includes Manual, Armature Plate and Mounting Hardware For Basic Out-swing Applications.

** In-Swing applications require a Z bracket (available below)

More Info +


Specify Finish:
Options

Qty

Product Details

600s, 600lb Single Magnetic Lock by Alarm Controls

Product Overview

Alarm Controls Corporation's 600 pound Single Magnetic Lock, model 600s. The 600s provides a minimum of 600 pounds holding force and utilizes the ACC E-Z mount system for easy installation. The 600s is 12 or 24 VDC, jumper selectable and can be used with any access control system.

Product Features

  • 600lbs holding force
  • E-Z mount system, No special tools required

Dimensions

  • Magnet size: 9 7/8 inches L x 1 11/16 inches H x 1 inch W
  • Armature size: 7-1/4 inches L x 1 1/2 inches H x 1/2 inches W

Power

  • 12 or 24 VDC, jumper selectable
  • Current draw: 505 mA @ 12 VDC, 260 mA @ 24 VDC
  • Built-in Arc Suppression
  • Instant Release, No hysteresis

Certification and Lisitng

  • UL 294 listed
  • UL 10C fire rated
  • CAN/ULC-S104 fire door conformant
  • UL 864 listed
  • CAN/ULC-S527 listed

Compatibility

  • The 600s can we used with any access control system

Finish

  • Non-Aluminum parts are plated to resist corrosion
  • Clear Anodized (US28) finish is standard
  • Duronic (US40) is available for special order
  • Dress-up covers in polished chrome and brass are available. Give us a call

Warranty

  • Lifetime Warranty
Also Known As
600s, 600S, ALA300600S
Finish
Aluminum
Manufacturer
Alarm Controls
Manufacturer Warranty
Lifetime
Model Number
600s
Power Requirements
24VDC/12VDC
Status Monitor
Not Available
UPC Code
604840236416
2 Questions asked on 600s, 600lb Holding Force Single Magnetic Lock



Q Chase Lewis • 05/27/2022, 12:36:35 PM Was curious of how these mag locks are controlled. Is it simply 2 wires supplying 24V and ground? And controlling it simply a matter of controlling that 24V signal? Just wanted to confirm.
A 05/31/2022, 12:04:26 PM Correct, the lock will require a 2-wire connection (+ & -) either 12VDC or 24VDC input. Typically you would keep the (-) connection constant and then switch the (+) wire through various control devices like buttons, keypads, motion sensors, etc. For further assistance with building a complete system please give us a call direct at 1-866-500-5625
Q greg cheng • 03/07/2024, 2:48:34 PM WANT TO CONFIRM IF BACKUP BATTERY IS INCLUDED IN CASE OF POWER OUTAGE.
A 03/08/2024, 10:40:25 AM The 600S would be just the magnetic lock as shown in this product listing. A low-voltage power supply (12 or 24VDC) would be required and are sold separately. Please see the "Related Products" listed below for potential options or give us a call and we would be happy to assist, 1-866-500-5625